Product Group : Riveting Machines :
CP-1 QUALITY ASSURANCE SYSTEM
The quality of the riveted parts is guaranteed by using the CP-1 to control the riveting operation (OK/NOK). A pressure transducer and a linear transducer monitor the process and provide feedback to accept o reject the riveted part.
This solution is suitable for units to be assembled where the rivet is short (small bolts, shafts), where there are few elements to join and their thickness is very stable. Its use is also necessary when the upper surface of the components to be joined to the rivet cannot be sensed.
CP-2 QUALITY ASSURANCE SYSTEM
The CP-2 quality assurance system is similar to the CP-1. It monitors the process and provides feedback to accept or reject the riveted part. It also permits the measure of the final riveted head. In this system, the riveting head incorporates a floating device which senses the components to be joined by the rivet, this sensing determines the “0” reference surface on which the rest of the parameters will be measured.
The most common application is for riveting very long rods or shafts where there can be great variation in the total tolerance. It is also ideal on large axles which bend when subjected to the riveting load or where the tolerances of the components to rivet are very wide
CAC constant height control is a system that guarantees the final dimensional quality of the rivet. The riveting head goes back immediately after reaching the riveted height. In this way, the necessary riveted time is reduced at its maximum.
Navigation
Partners & Brands
News
Mission Statement
Prospot aims to be the preferred supplier for resistance welding, open arc welding, joining technologies and manufacturing products to industry by providing cost effective solutions and quality service.
E-mail: